Commonly upgraded TLT parts

I wanna compile a list of commonly upgraded TLT parts. If you know of any and have part numbers please post.

Revo Push Rods (102mm)

#5318 at tower hobbies $6.69

INCLUDES: (2) pushrods
(4) rod ends
(4) hollow ball ends

REQUIRES: Installation on a Traxxas Revo

SPECS: Pushrod length end-to-end: 4-1/16" (102mm)
Pushrod length between threads: 3-1/4" ( 81mm)
Diameter of unthreaded section: 3/16" ( 5mm)

Stampede tranny - $60.00 from Tammies hobby

or the R2 tranny -$80.00 from RC4WD.com

Pede driveshafts and yokes - $10.00 from LHS or Tower hobbies.

Multiple wheels from undyed Traxxas rustler fronts for $4.00 a pr.

or Aluminum beadlocks from RC4WD for $110.00

Tires - Moabs or Mashers for around $15.00 a pr.

Bearings for axles - $20.00 a set of 20.

hey, do you still have the part numbers for any of those parts? i know ya used to save them.

Traxxas diff output yokes #4628 LHS $4.00
Traxxas rod ends long ones #1942 $7.00 LHS 20 pck.
Traxxas peedy sliders #1951 $6.00 LHS

Traxxas part # Tower part #
Jato Driveshafts (2) 5550 LXKMG1 $7.69
Steel drive yokes (2) 4628X LXJG59 $ 17.99
Long truck half shafts (6) 1953 LXJH85 $ 9.29

STOCK TLT AXLE REPLACEMENT PARTS
TAMIYA # TOWER #
AXLE SHAFTS 9804177 LXGKG2
DIFF. COVER 5405029 LXGHJ8
RING GEAR 5455002 LXGKG1
DIFF. BEVEL GEAR SET 50562 LXGK41
D PARTS (AXLE CASE) 0004219 LXGHG0
BEVEL GEAR SHAFTS (2) 9804180 LXGHP9
2MMX5 SOCKET SCREWS (12) (HPI) Z409 LXMDK5

how about
7378...AE rear stub axle 3/16

sould be longer than the stock ones

hey guys what kind of wideners are you using? i dont have enough thread fur the nuts to stay tight. i was thinking about getting blackfoot axelstubs anyone know the part number? also what do you think of barrel nuts?

Hey Revin. I just started running a set of blackfoot axles stubs and for the money you can't beat them. On my stock stubs, I couldn't get the nylon nut to grab the threads using traxxas front wheels. And someone replied on RCC that they wouldn't give you anymore threads but they did allow me to use the nylon nuts on them. You do have to grind about an 1/8" off the drive cups. They're a little deeper that stock and bind up at full turn. The part# for the at tower is LXGG15. $8.00 a pair. The Tamiya # is TAMC4342. They come two to a bag. You also have to put spacers between the knuckle and the hex pin. I used a brass spacer and half of a plastic one that comes in the TLT kit.

Here are all the part #'s for a pede tranny. Total cost between $50 - $60. The only thing that wasn't use was the slipper spring. I couldn't get the nut started because the spring had so much tension on it.
#3691A Gearbox halves w/ idler gear shaft.

#3195X Top drive gear, machined derlin.

#1996X Idler gear, machined alum. (30T)(SRT)

#2582 Screws, 3x30mm button head machine(hex drive)(6).

#3693 Spur gear adaptor/1.75mm metal hex spacer.

#1993 Top shaft and roll pin.

#2580 3x20mm, button hex screw(6)

#2382 4 Planet gears, 4 planet shafts, 2 sun gears, 1 sun gear alignment shaft.

#2381 Main diff gear w/ side cover plate and screws.

steel output yokes

part # 4628 LHS

clodstall wrote:

steel output yokes

part # 4628 LHS

The steel yokes are actually #4628X

The plastic yokes are #4628

BrandO wrote:

clodstall wrote:

steel output yokes

part # 4628 LHS

The steel yokes are actually #4628X

The plastic yokes are #4628

you are correct sir.

ok guys, i am about ti get my tlt. i wanted to know if it came with bushings? i know i need bearings and they will soon follow. but i wanted t and running asap

yep comes with bushings for the axles some metal some plastic. Bearings for the stock tranny if your going to use it.

thanks max....i already have a chassis trans, electronics rod ends. drive shafts. body, wheels and tires. this will complete my build.

what size bearings are in the stock trans?

Come on guys post some more parts that you guys use. I need to get a list for the hobby shop that I'm working with. He is game if we can get it together.

heres the list I currently have compiled.
Clods
Adapters 12mm to 14mm, 17mm, or 23mm
Moabs in 40 series, mashers in both 40 series and maxx sized.
Lathe motors. 45t, 55t, and 65t
Crawler bodies
4" maxx sized aluminum shocks. The Integy are a common choice.
Revo rod ends
Clod axle parts, inner and outer axles, axle tubes, and gear sets.
Tekin rebel 2 esc
High torque servos-hitec 645mg- tower pro mg995


TLT
Revo Push Rods (102mm) 5318
R2 tranny
Multiple wheels from undyed Traxxas rustler
Aluminum beadlocks from RC4WD
Tires - Moabs or Mashers for around
Bearings for axles - $20.00 a set of 20.
Traxxas diff output yokes #4628
Traxxas rod ends long ones #1942 20 pck.
Traxxas peedy sliders #1951
Jato Driveshafts (2) 5550
Steel drive yokes (2) 4628X
Long truck half shafts (6) 1953

STOCK TLT AXLE REPLACEMENT PARTS
AXLE SHAFTS 9804177
DIFF. COVER 5405029
RING GEAR 5455002
DIFF. BEVEL GEAR SET 50562
D PARTS (AXLE CASE) 0004219
BEVEL GEAR SHAFTS (2) 9804180
2MMX5 SOCKET SCREWS (12) (HPI) Z409

Stampede tranny
#3691A Gearbox halves w/ idler gear shaft.
#3195X Top drive gear, machined derlin.
#1996X Idler gear, machined alum. (30T)(SRT)
#2582 Screws, 3x30mm button head machine(hex drive)(6).
#3693 Spur gear adaptor/1.75mm metal hex spacer.
#1993 Top shaft and roll pin.
#2580 3x20mm, button hex screw(6)
#2382 4 Planet gears, 4 planet shafts, 2 sun gears, 1 sun gear alignment shaft.
#2381 Main diff gear w/ side cover plate and screws.